X8 Cutters

A great design to satisfy high expectations. XIKAR's X8 cutters are designed to cut up to a 64 ring gauge cigar.

X8 has the sharpest stainless steel blades with an HRC of 57 and the feel of the cutter is almost as good as the cigar's taste.

This cutter makes a very clean effortless cut!

Envoy Cigar Case

Because the finest cigar in the world is worthless after being crushed in your pocket, XIKAR now ensures you can protect your investment in full style!

The Envoy holds three cigars up to 54-ring gauge each, keeping any smoke safe with a modern style all its own. With top-grain, armada leather, the piece has a well-dressed appearance and a soft feel. Contrast stitching secures the leather, giving it a contemporary look. The inner lining of the crush-proof case, crafted with genuine Spanish cedar, holds the ambient humidity of the cigar and projects the fresh cedar smell of a humidor on every opening. Stylish metal caps cover each end, reinforcing the strength of the case. Stitching: Black stitching on red leather, tan on cognac and white on black leather.

The telescoping case will hold up to three, 54-ring gauge, Churchill-length cigars.

NEW Havana Collection 

Introducing The Havana Collection Envoy cigar case: the perfect compliment to XIKAR’s popular Xi3 Havana Cutter & EXII Havana Lighter.

*Cigars not included*

Introducing The Carbon Fiber Envoy cigar case: the perfect compliment to XIKAR’s popular Xi3 Carbon Fiber & EXII Carbon Fiber Lighter.

Boveda's One-Step Calibration Kit is a simple and surefire method to accurately calibrate any digital or analog hygrometer.  The One-Step Calibration kit utilizes  Boveda's 75.5% relative humidity standard–widely used and accepted by chemists and lab professionals to determine the accuracy of any hygrometer (also known as the “salt test”). Humidipak’s One-Step Calibration kit is used by some of the top museums in the world to calibrate their instruments.

The test kit can be used more than once.

Hygrometer not included.

New Stinky Ashtray

The CA-ST-1 has been designed just like the big-bowled Stinky ashtray but is smaller and features one cigar rest. Personal Stinky's Junior edition ashtray, beautifully designed yet functional.

Features:

Blank Cigar Bands. These self adhesive bands can be used to place information about your cigars on the individual cigars. The band have a self adhesise strip that is FDA approved for use with food products and in hospital use. The bands are 3/4" wide by 3 1/4" long.

Never wonder again if your digital hygrometer is accurate!

The Adjustable Hygrometer is the first digital hygrometers capable of being adjusted after calibration. Available here in a rectangular shape.

Simply perform the 75% salt test using Humidipak's One-Step Calibration Kit. When you adjust each click of the adjustment knob changes the humidity displayed by 1%, press the set button, and your Adjustable Hygrometer is calibrated and ready to go!

Click on "Details" for full instructions.

Size: 2 3/4" x 1 3/4" x 1/2" thick. Includes a self adhesive magnet for mounting the hygrometer to the inside of your humidor.

The hygrometer displays in either Fahrenheit or Celcius, your choice.

You can add a Boveda Calibration Kit to your Hygrometer order for just $3.25 more, normal price for the Calibration Kit is $4.97.

Introducing the NEW Camo G1 Vista Palio Cutter!

Palio - The Cutter for Today's Aficionado

Stylishly crafted, the Palio is the ideal complement to your finest hand-rolled cigars. Crafted for the sophisticated connoisseur, the use of today's most refined cutter is a must for serious smokers.

With Palio, you'll be assured that the finest cigars in your collection will be prepared accordingly. When in the company of colleagues, associates, or comrades, let Palio give you the cutting edge!

Palio Cutters come with a nice nylon carrying case as well! 

This is the same perforated tube that I offer filled with Heartfelt Beads. These are empty so that you can build your own humidifier tube using bulk Heartfelt Beads.

This tube measures 4 1/2" long, 3/4" in diameter and will hold approximately 1/2 ounce of Heartfelt Beads.

The core of the The Heartfelt Humidity-Sheets are made out of the same silica based material that the Heartfelt Beads are made of so the sheets have the same high quality humidification properties as Heartfelt Beads. This core is laminated between two gas permeable sheets, one side is tan in color the other side is gray.

The 2"x5" can be cut to any size you want to fit in the bottom of any container and affords good humidification for many days without recharging. To recharge just place the Humidity-Sheet in your humidor and let it absorb the humidity or spray it lightly with a spray bottle containing distilled water. The sheets are 1/8" thick and are flexible.

Calculating how much you need is easy. Each square inch of Heartfelt Humifity-Sheet conditions approximately 22 cubic inches of space.

Space Saver Cigar Tray

Maximize your valuable humidor space with our 100 count adjustable cigar tray.
 

In Stock and Ready to Ship!

Hydra SM Humidifier

 Optional equipment is shown below.

The NEW Hydra™ Adjustable Electronic Cigar Humidifier is designed to automatically regulate the humidity inside larger humidors up to 8 cubic feet.

• The hygrometer built into this unit uses the same proven technology used in the Hygro Set™ line of adjustable hygrometers. This makes it possible to calibrated and adjust the hygrometer so the display shows an accurate humidity reading.

• The unit has a large LED readout.

• The unit updates the humidity reading every 30 seconds providing a very accurate measurement of the relative humidity in your humidor.

• The unit has two external fan ports which gives the unit the ability to run up to three additional fans for air circulation (see fan kit and extra fans below).

• The Tank on the Hydra is refillable.

• The unit has both audible and visual low water indicator thus elimination the need to check the level visually.

• Full detailed instructions are enclosed with the unit.

• Measure 6” long x 2” wide x 3 3/8” tall.

  Optional Accessories: (see below)

  Euro Wall Transformer
  Fan Kit (fan, splitter, cable)
  Individual External Fans

The unit has a 1 year warranty.

This is one of the best Air Purifiers I have found on the market so far. I have been using this unit in my home for 4 months now and I am impressed with the performance. 

I have used the unit in my office to test the ability of the Ozone generator to clean out the cigar smoke odors. My office is the one place I have in the winter to smoke cigars. To test the unit I smoked in the office for 2 straight weeks leaving the window closed and the door closed (a requirement of my wife). To say that the office was getting a litlle stinky is an understatement.

I ran the unit overnight per the instructions and was absolutely amazed in the morning. There was not a hint of odor left in the office after the unit did its thing. I am sold on this unit and it does what it is intended to do very well.

The unit comes with a HEPA filter that can be mounted on the back to add additional air cleaning.

Click on "Details" in the upper right corner for more info.

Perfect for Home Decor
LightningAir is made of solid wood and stainless steel to blend into the home decor.

Unit Dimensions: 12" Tall, 8" Wide and 10" Deep.

Select the Color For Your Decor...

We loved the Perfecto Cigar Holder the minute we saw it. Not only is it a high quality,
U.S.A. made product at a great price, but it is also the only cigar holder we know of that
doesn't clamp to your cigar - it cradles it. Other cigar clips pinch your cigar. Not only
does this require more effort to place and remove the cigar, it may also damage the
wrapper. Think of the Perfecto Cigar Holder as your take anywhere “ashtray on the go.”
Perfecto Cigar Holder is 100% made in the U.S.A. from first run virgin nylon, which is
immune to UV rays and rust and will not burn from the heat of the cigar. It holds the
cherry of your cigar above the ashtray to keep it burning evenly while it is cradled.
It clamps to almost anything, so it is great for golf carts, boats, RV's, lawn chairs, or just
about anywhere you can use a third hand. It’s great on the driving range too. Just clamp
it to the head of your driver!

The XIKAR® cutter gives cigar enthusiasts the finest cigar cut with power, efficiency and ease of use. An aluminum body encases HRC57 stainless steel blades in a spring-loaded, ergonomic shape. This is the finest cutter you can buy - WE GUARANTEE IT!

Xi cutter blades are made of high quality 440 stainless steel with an HRC of 57.

All Xi cutters are the same ring gauge: they will cut a 54 ring gauge cigar in half. Depending on how much cap you cut, they will cut up to a 58 ring gauge cigar.

An evolution in design

The EVO features a powerful twin torch flame design, a sturdy chrome plated body and all the value added features you’ve come to expect from Blazer Products in a modern and sporty package.

The powerful wind-resistant blue torch flames provide maximum coverage for a quick and even light every time, even in the most demanding environments.

The EVO is available in 3 styles, each with a highly polished reflective body. The black and blue colors feature soft rubber padding that’s easy on the hand and provides an extra secure non-slip grip.

A retractable cigar punch on the bottom and a functional key ring latch on the side round out this feature packed twin torch lighter.